Your cart is currently empty!.
You may check out all the available products and buy some in the shop.
Continue Shopping- “Supporto triplo universale per manometri da 52mm carbon look” already exists in your wishlist
-
I-Meter P100-M Multi-gauge for FIAT PANDA 141
€116.0DIGITAL MULTI-GAUGE FOR FIAT PANDA 141 CLOCK, INCLINOMETER, VOLTMETER. The P100-M is a state-of-the-art time/incline/voltage indicator, designed specifically for installation in your FIAT PANDA 141 as a replacement for the original clock. The P100-M features a high-brightness, full-color TFT IPS display, which allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATES
BOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine Speed
TPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 200mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Dimensions: 60 x 56 x 41 mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc.
-
FIAT GRANDE PUNTO (3rd Series) 52mm gauge mount for left-hand air vent
€26.052mm GAUGE MOUNT SPECIFICALLY FOR THE FIAT GRANDE PUNTO (3rd SERIES) – REPLACES THE LEFT-HAND AIR VENT
This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features an impeccable finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in lower-quality, fragile, and delicate components. -
FIAT PANDA 169 52mm gauge mount for left or right central air vent
€15.052mm GAUGE MOUNT SPECIFICALLY FOR FIAT PANDA 169 – REPLACES THE LEFT OR RIGHT CENTER AIR VENT
This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features an impeccable finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in lower-quality, fragile, and delicate parts. -
FIAT GRANDE PUNTO (3rd Series) 52mm gauge mount for the left-side central air vent
€26.052mm GAUGE MOUNT SPECIFICALLY FOR THE FIAT GRANDE PUNTO (3rd SERIES) – REPLACES THE LEFT-CENTRAL AIR VENT
This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the existing air vent and replace the grille insert. The mount features an impeccable finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in lower-quality, fragile, and delicate components. -
FIAT GRANDE PUNTO (3rd Series) 52mm gauge mount for the right-hand central air vent
€26.052mm GAUGE MOUNT SPECIFICALLY FOR THE FIAT GRANDE PUNTO (3rd SERIES) – REPLACES THE RIGHT-HAND CENTRAL AIR VENT
This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features an impeccable finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often yield fragile, delicate parts with poor surface quality. -
FIAT 600 187 52mm gauge mount for the left-center air vent
€20.052mm GAUGE MOUNT SPECIFICALLY FOR FIAT 600 (169) – REPLACES THE LEFT-CENTER AIR VENT This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features an impeccable finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in poor quality, fragile, and delicate components.
-
FIAT 600 187 52mm gauge mount for the right-side central air vent
€20.052mm GAUGE MOUNT SPECIFICALLY FOR THE FIAT 600 (169) – REPLACES THE RIGHT-HAND CENTER AIR VENT
This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features an impeccable finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in lower quality, fragile, and delicate components. -
FIAT 500 2015-2020 52mm gauge mount for left-hand air vent
€14.052mm GAUGE MOUNT SPECIFICALLY FOR FIAT 500 (2015–2020) – REPLACES THE LEFT-HAND AIR VENT This mount allows you to install a 52mm gauge directly into your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features a flawless finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in poor quality, fragile, and delicate components.
-
FIAT 500 2007-2014 52mm gauge mount for left-hand air vent
€10.052mm GAUGE MOUNT SPECIFICALLY FOR FIAT 500 (2007–2014) – REPLACES THE LEFT-HAND AIR VENT
This mount allows you to install a 52mm gauge in your vehicle without compromising the interior's aesthetic. Simply remove the air vent and replace the grille. The mount features a flawless finish, as it is produced using Multi Jet Fusion (MJF) technology with PA12 nylon—a superior alternative to standard 3D printing methods, which often result in poor quality, fragile, and delicate components. -
I-Meter P230 digital indicator for GRANDE PUNTO 3
€116.0DIGITAL MULTI-FUNCTION GAUGE FOR FIAT GRANDE PUNTO – INCLUDES CLOCK, INCLINOMETER, AND VOLTMETER. I-Meter is a state-of-the-art time/incline/voltage indicator, specifically designed for installation in your FIAT GRANDE PUNTO—either in the left air vent (P230-1), the center-left air vent (P230-SX), or the center-right air vent (P230-DX). I-Meter features a high-brightness, full-color TFT IPS display that allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as: Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATESBOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine SpeedTPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 50mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Display module dimensions: 84 x 68 x 20 mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc.
-
I-Meter P220 Multi-gauge for FIAT 500 2015
€116.0DIGITAL MULTI-FUNCTION GAUGE FOR FIAT 500 2015: CLOCK, INCLINOMETER, VOLTMETER. I-Meter is a state-of-the-art time/incline/voltage indicator, specifically designed for installation in your 2015 FIAT 500—in the left-hand air vent (version P220 for non-ABARTH models, or version P220-A for ABARTH models). I-Meter features a high-brightness, full-color TFT IPS display that allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATESOBD1 interface:
It allows you to interface with your vehicle's control unit via the OBDII diagnostic port with CAN-BUS, enabling you to detect and also display: -ENGINE SPEED (RPM) -SPEED -THROTTLE POSITION (TPS) -ENGINE COOLANT TEMPERATURE (ECT) -INTAKE AIR TEMPERATURE (IAT) -MASS AIR FLOW (MAF)
BOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine SpeedTPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 50mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Display module dimensions: 84 x 68 x 20 mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc. -
I-Meter P210 Multi-gauge for FIAT 500 2007
€116.0DIGITAL MULTI-FUNCTION GAUGE FOR FIAT 500 2007: CLOCK, INCLINOMETER, VOLTMETER. I-Meter is a state-of-the-art time/incline/voltage indicator, specifically designed for installation in the left-hand air vent of your 2007 FIAT 500 (model P210 for non-ABARTH versions, or P210-A for ABARTH versions). I-Meter features a high-brightness, full-color TFT IPS display that allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATESBOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine SpeedTPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 50mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Display module dimensions: 84 x 68 x 20 mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc.
