Your cart is currently empty!.
You may check out all the available products and buy some in the shop.
Continue Shopping-
I-Meter P200 Multi-function gauge for FIAT 600 187
€116.0DIGITAL MULTI-FUNCTION GAUGE FOR FIAT 600 (187) – CLOCK, INCLINOMETER, VOLTMETER. I-Meter is a state-of-the-art time/incline/voltage indicator, specifically designed for installation in your FIAT 600 (187 series) within either the right-hand (P200-DX) or left-hand (P200-SX) central air vent. I-Meter features a high-brightness, full-color TFT IPS display that allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATES
BOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine Speed
TPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 50mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Display module dimensions: 84 x 68 x 20 mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc.
-
I-Meter P120 Multi-function gauge for FIAT PANDA 312/319
€116.0DIGITAL MULTI-FUNCTION GAUGE FOR FIAT PANDA 312/319: CLOCK, INCLINOMETER, VOLTMETER. The P120 is a state-of-the-art time/incline/voltage indicator, specifically designed for installation in your FIAT PANDA 312/319 as a replacement for the original clock. The P120 features a high-brightness, full-color TFT IPS display, which allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATESOBD1 interface:
It allows you to interface with your vehicle's control unit via the OBDII diagnostic port with CAN-BUS, enabling you to detect and also display: -ENGINE SPEED (RPM) -SPEED -THROTTLE POSITION (TPS) -ENGINE COOLANT TEMPERATURE (ECT) -INTAKE AIR TEMPERATURE (IAT) -MASS AIR FLOW (MAF)
BOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine SpeedTPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 50mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Display module dimensions: 84 x 68 x 20 mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc. -
I-Meter P110 Multi-gauge for FIAT PANDA 169
€116.0DIGITAL MULTI-FUNCTION GAUGE FOR FIAT PANDA 169: CLOCK, INCLINOMETER, VOLTMETER. The I-Meter P110 is a state-of-the-art time, tilt, and voltage indicator, specifically designed for installation in the central air vents—on either the left or right side—of your FIAT PANDA 169. The I-Meter features a high-brightness, full-color TFT IPS display, which allows it to show the following values: -TIME -TILT (Roll - Pitch) -BATTERY VOLTAGE Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as: Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:GPS1 Interface:
The GPS1 antenna allows you to receive GPS data such as: -GPS SPEED -COMPASS -ALTIMETER -DISTANCE TRAVELED -ENGINE HOUR METER -GPS COORDINATESBOX1 Interface:
Allows interfacing with PZR sensors to also detect: -EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1) -OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1) -TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1) -OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1) -LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend using a Lambda 4.9 sensor) -TPS THROTTLE OPENING -T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1) -RPM Engine SpeedTPMS1 Interface:
Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT: -TIRE PRESSURE (Bar – Psi – kPa) -TIRE TEMPERATURE (°C – °F) -LOW PRESSURE ALARM -SENSOR BATTERY LEVEL -RECEIVED SIGNAL STRENGTH The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display. Technical specifications: • Power supply: 6 to 32 Volts • Power consumption: less than 50mA • 1.85" TFT IPS display, 360x360 resolution, 65K colors • Capacitive touch screen • Dual-core 32-bit 240MHz processor • Inclinometer: +/-90 degrees with an accuracy of +/-1° • Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts • Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi • Dimensions: 76mm in diameter x 25mm The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color. Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc. -
I-Meter P100 Multi-gauge for FIAT PANDA 141
Price range: €97.0 through €105.5DIGITAL MULTI-FUNCTION GAUGE FOR FIAT PANDA 141: CLOCK, INCLINOMETER, VOLTMETER, THERMOMETER. The P100 is a state-of-the-art time, tilt, voltage, and temperature display, specifically designed to fit into the original clock housing of your Fiat Panda 141. The P100 features a high-brightness, full-color TFT IPS display that shows the following values: TIME, INCLINATION (roll and pitch), BATTERY VOLTAGE, and TEMPERATURE. The tilt screen will be created by displaying the exact outline of your vehicle (side view for pitch, rear view for roll) in your preferred color. The P100 has no buttons; instead, its touch screen allows you to view various settings with a simple tap on the display. On the front panel, there is a USB-C connector for charging a mobile phone or powering any USB device. The instructions included in the packaging (in Italian and English) provide all the information needed for assembly and electrical connection. Three versions are available, which differ in how they detect and display the temperature: P100: INTERIOR TEMPERATURE – This unit features a built-in sensor on the front panel to detect the temperature inside your vehicle's cabin. P100-E: EXTERIOR TEMPERATURE – This unit comes with a probe on a 3-meter cable, designed to be placed outside the vehicle to detect the outside temperature. P100-H: ENGINE TEMPERATURE – This unit comes with a probe on a 3-meter cable, intended for installation at a designated point on the engine/radiator or via a standard "T" fitting (not included) inserted into the radiator inlet hose. The sensor features a 1/8" thread Technical specifications: • Power supply from 6 to 32 Volts • Consumption less than 50mA • Maximum current that can be supplied via the USB-C connector: 0.5 Amperes • Measurable temperature range -P100 version: -55 - 125 °C / -67 - 257 °F -P100-E version: -55 - 125 °C / -67 - 257 °F -P100-H version: 0 - 150 °C / 32 - 302 °F • Display TFT IPS 240X240 da 1,28" 65K colori • Capacitive touch screen • 32bit 240MHz dual-core processor • Tilt precision 1 degree • Temperature precision to 1/10 of a degree • Voltage precision: 1/10 of a volt • Backup battery for saving the time in the absence of power • Multilingual menu (ITALIAN - ENGLISH - FRENCH - GERMAN - SPANISH) • Date format (day - month - year / month - day - year) • Time format (12-24 / am-pm) • Units of measurement (°C - °F) • Dimensions 60 x 56 x 41 mm
