I-Meter P200 Multi-function gauge for FIAT 600 187

DIGITAL MULTI-FUNCTION GAUGE FOR FIAT 600 (187) – CLOCK, INCLINOMETER, VOLTMETER.

I-Meter is a state-of-the-art time/incline/voltage indicator, specifically designed for installation in your FIAT 600 (187 series) within either the right-hand (P200-DX) or left-hand (P200-SX) central air vent.
I-Meter features a high-brightness, full-color TFT IPS display that allows it to show the following values:

-TIME
-TILT (Roll - Pitch)
-BATTERY VOLTAGE

Additionally, thanks to certain interfaces (sold separately), you can expand the display to other values such as:

GPS1 Interface:

The GPS1 antenna allows you to receive GPS data such as:
-GPS SPEED
-COMPASS
-ALTIMETER
-DISTANCE TRAVELED
-ENGINE HOUR METER
-GPS COORDINATES

BOX1 Interface:

Allows interfacing with PZR sensors to also detect:

-EXHAUST GAS TEMPERATURE EGT (0 – 1000 °C K Thermocouple + interface Cod. KEGT1)
-OIL TEMPERATURE (0 – 150 °C Temperature Sensor TEMP1)
-TURBO (-1 / 3 Bar Turbo Sensor Cod. TURB1)
-OIL PRESSURE (0 – 10 Bar Oil Pressure Sensor Cod. POIL1)
-LAMBDA (10 – 20 AFR S. Lambda Narrowband Cod. LAMNB, S. Lambda 4.9 Wideband + interface Cod. LAM49, we recommend
using a Lambda 4.9 sensor)
-TPS THROTTLE OPENING
-T.H2O Engine Temperature (0 - 150°C Temperature Sensor TEMP1)
-RPM Engine Speed

TPMS1 Interface:

Allows wireless display and reception of tire pressure and temperature transmitted by the sensors included in the TPMS1 KIT:

-TIRE PRESSURE (Bar – Psi – kPa)
-TIRE TEMPERATURE (°C – °F)
-LOW PRESSURE ALARM
-SENSOR BATTERY LEVEL
-RECEIVED SIGNAL STRENGTH

The I-Meter has no buttons, as its touch screen allows you to view various settings with a simple tap on the display.

Technical specifications:
• Power supply: 6 to 32 Volts
• Power consumption: less than 50mA
• 1.85" TFT IPS display, 360x360 resolution, 65K colors
• Capacitive touch screen
• Dual-core 32-bit 240MHz processor
• Inclinometer: +/-90 degrees with an accuracy of +/-1°
• Voltmeter: 6–32 Volts, with a resolution of 0.1 Volts
• Units of measurement: °C/°F, km/h/MPH, bar/kPa/psi
• Display module dimensions: 84 x 68 x 20 mm

The inclinometer screen is created by displaying an exact graphic of your vehicle in your preferred color.
Furthermore, you can customize the startup screen with your own logo, the vehicle brand’s logo, etc.